Reliable shock absorption and impact protection for fall heights up to 3 meters

Seamless rubber safety surfacing made with RUBAPRO EPDM granules (Ethylene Propylene Diene Monomer) and RUBAPRO Impact Protection Slabs are suitable for both indoor and outdoor climbing activities. It is a durable and long-lasting solution.

Wet pour system allows creation of high quality, colourful, safe, skid-resistant aesthetic surfaces for eye catching functional spaces. With its odourless characteristic, our surfacing system is suitable for indoor as well as outdoor usage. 

DOUBLE LAYER EPDM – Seamless rubber safety surfacing

Thickness: 15mm (8+7) to 300mm, according to fall height

Standard colours: Grey, red, green, blue

Special colours: Over 30 colours, see colour chart 

Application: Poured in place 

Composition: Coloured EPDM granules + PU binder

Usage: Outdoor (water permeable) and indoor

Granule sizes: Standard size 1 - 3,5mm, other sizes upon project

Cushion layer: Black EPDM granule, size 2 - 6mm, 2 - 10mm upon request

Top layer: Coloured EPDM 

DOUBLE LAYER EPDM ECO – Double elastic with low cost

Thickness: 15mm (8+7) to 300mm, according to fall height

Standard colours: Grey, red, green, blue

Special colours: Over 30 colours, see colour chart 

Application: Poured in place 

Composition: Coloured EPDM granules + PU binder

Usage: Outdoor (water permeable) and indoor

Granule sizes: Standard size 1 - 3,5mm, other sizes upon project

Cushion layer: Black SBR granule, size 2 - 6mm, 2 - 10mm upon request

Top layer: Coloured EPDM 

Impact protection slabs are easily installed directly on any flat surfaces like concrete, asphalt, stone, ceramic tile and wood decking. Some slab types are portable, suitable for loose lay installation. Some of them are interlocking. Slabs can be glued. 

SQUARE SLABS ALL EPDM – With cushion system

Sizes: 50cm x 50cm - 40cm x 40cm

Thickness: 20mm, 25mm, 30mm, 40mm, 42mm, 45mm, 50mm

70mm (50+20), 80mm (50+30), 90mm (50+40), 100mm (50+50)

Standard colours: Black, grey, red, green, blue

Special colours: Over 30 colours, see colour chart

Cushion system: 50mm extra soft EPDM base slab

Catalogue codes: MS E-50 / MS E-40

SQUARE SLABS ECO – With cushion system

Sizes: 50cm x 50cm - 40cm x 40cm

Thickness: 20mm, 25mm, 30mm, 40mm, 42mm, 45mm, 50mm

70mm (50+20), 80mm (50+30), 90mm (50+40), 100mm (50+50)

SBR colours: Black, grey, red, green

Cushion system: 50mm soft SBR base slab

Catalgue codes: MS S-50 / MS S-40

EPDM slabs are odourless, suitable for indoor and outdoor use. 

Characteristics:

Resilient – Shock absorbent - Weatherproof – Durable – Slip resistant – Good drainage – Porous – Fast dry – Low maintenance – Replaceable – Easy to install – Comfortable

Physical properties:

RUBAPRO rubber tile surfacing meets strict testing standards to provide required shock absorption, long wear, water permeability, traction and wear resistance. 

Composition:

Coloured EPDM granules (Ethylene Propylene Diene Monomer) + PU binder

EPDM granules fulfill the stringent requirements of the EN 71-3 standard “Safety of Toys” and REACH “Registration, Evaluation, Authorization and Restriction of Chemicals” regulations.

All systems are tested according to EN-1177, European standard for impact attenuating surfacing. Surfaces fulfilling test requirements of this standard are considered to comply with the requirements for impact attenuation in EN 1176-1. By choosing measurement of Head Injury Criterion, HIC, as the criterion of safety, the method considers only the movement of the head when it hits the surface of the impact area.

Our EPDM granules are free of heavy metals, halogen compounds, phthalates and PAH “Polycyclic Aromatic Hydrocarbons”.

Ask your Rubapro contact for Impact Protection Slabs and Rubber Granules catalogues.